Category: Engineering Homework Help

This week discuss a current business process in a specific industry. Note the following:

-The current business process itself.

-The industry the business process is utilized in.

After explaining the current situation, take the current learning from the course and:

• Explain a new technology that the business should deploy. Be specific, don’t only note the type of technology but the specific instance of technology. (For example, a type of technology is smart automation a specific type of automation is automated light-dimming technology).
• Note the pros and cons of the technology selected.
• Note various factors the business should consider prior to deploying the new technology

The above submission should be three pages in length. Remember the total length does not include the APA approved cover page or the references. There should be at least three APA approved references to support your work.

A 4-12 page paper covering the concepts and topics since the beginning of the course!

Each topic DOES NOT need its’ own section. For example, it may be easiest to talk about curvilinear motion in one section, or you may find it easier to separate curvilinear motion into two sections. Do what works best for you!

The paper should be single spaced, size 12 font, Times New Roman. You do not need to have a specific format for your reference section (if you use one), but you should include one if you are using outside references besides the class book.

Additionally, 1 example problem from the topics above should be included in the paper and explained in detail. That is 1 example problem in total!

Complete the following assignment in one MS word document:

Chapter 10 –discussion question #1-2 & exercise 1 & 7

Chapter 11- discussion question #1-4 & exercise 4

When submitting work, be sure to include an APA cover page and include at least two APA formatted references (and APA in-text citations) to support the work this week.

All work must be original (not copied from any source).

CLA 1 Comprehensive Learning Assessment I – CLO 2, CLO 3, CLO 4, CLO 5, CLO 6

Analyze two examples of how the Internet of Things benefits organizations (public sector, private sector, for-profit, or not-for-profit).

Analyze two specific business uses of Internet of Things and two specific business uses of RFID technology (four total).

1. Not a compare and contrast

Which of these might have ethical implications for the company? Why or why not?

write about Automated biaxial strain device for microscopes.

1.Overall Objectives

Discuss the overall project (vs. the specifics of your approach)

Include brief discussion of any economic scenario your project is oriented towards (product commercialization, non-profit tech transfer, etc).

Explain what your team hopes to accomplish.

Highlights of Two brief examples:

Residents of urban areas experience increased street, basement and river flooding during small to mid-range storms due to excess impervious cover. Minimizing this flooding will increase safety and reduce economic loss.

Patients who take maintenance doses of medicine often forget to take their medicine at the prescribed time which can result in symptom flair ups and ineffective treatment.  Addressing this problem will minimize this risk and improve health outcomes.

I’m working on a engineering question and need an explanation and answer to help me learn.

ONE page summary of the key points from the R&S presentation.

https://www.sandiegouniontribune.com/entertainment…

https://thedailyaztec.com/100159/news/renovations-…

https://hga.com/projects/san-diego-state-universit…

Part 1:

For this discussion, review the course syllabus and our course outcomes and then create a post that addresses the following topics:

What personal or professional experiences have you encountered that are related to the general topics of this course?

After reviewing the course outcomes, what do these outcomes mean to you? How are these outcomes relevant to your own personal/professional experiences and interests?

After reviewing the course syllabus and the assignment guidelines for your Module One activities, what resources will you need in order to be successful in this course? How can your instructor and fellow classmates help you reach the outcomes of the course?

In responding to your peers, what additional resources can you share that will help you and your fellow classmates be successful? What commonalities do you share with your classmates? What opportunities can you explore for collaboration and peer support?

PART2:

You will also be creating an ePortfolio home page using the ePortfolio tool. To access the ePortfolio tool, in your Learning Environment, click on Tools, then ePortfolio.

Next, create a welcome page for your ePortfolio. The welcome page should include your short professional biography. Read What to Do When You Need a Bio, Rather Than a Résumé as a reference for a professional biography. 

PART 3: 

The professional statement of purpose will articulate the skills from the program/course outcomes and reflect on your personal goals and experience. This statement should be formed as an advertisement for potential employers that gives them specific reasons to hire you. What skills do you have? Where will these skills be showcased in your résumé? How will these skills add to your overall qualifications and/or technical skills?

Prompt: Write a professional statement of purpose. Tailor this assignment to your personal goals. Milestone One will showcase who you are, what you have to offer the field of information technology, and how you intend to do that through your writing. This professional statement of purpose will be the second page in your e-portfolio.

https://www.forbes.com/sites/deborahljacobs/2014/0…

https://web.archive.org/web/20150428021716/http://…

This is the final , you will submit this file today before midnight. Please follow the instructions below.

1. You are given a Revit file ( You Don’t Need to create one yourself) in a folder on blackboard called yourlastname-final.rvt containing reference plane lines and Grids to create the walls, you can find dimensions on the sample solution.
2. Please notice that the Revit file already includes several levels.
3. The file also contains the 5 (empty) sheets with titles, so you do not have to set up the sheets yourself.
4. Create a folder with your Lastname on your desktop with the Revit file to work and save it as yourlastname-final, and later, once you are done, save it and submit on blackboard the PDF file only. I will not grade the Revit file.

Please do not work directly from your flash drive.

Follow the sample solution pdf file and the outlined instructions.

The Assignment will be available from Wednesday, May 19th at 12:15 pm, until midnight.

Good Luck.

1. Friction stir Processing (FSP)

1.1. FSP process parameters- Machine Specific Variables

1.2. FSP process parameters- Tool variables

1.3. FSP process parameters- Reinforcement variables

1.4. FSP process parameters- Material properties

1.5. FSP process parameters- other strategies

2. Aluminium Alloys

2.1. Aluminium Alloys based surface composites

3. Responses

3.1 Responses – Reinforcement particles distribution

3.2 Responses – Microstructural characterization

3.3 Responses – Mechanical Characterization

3.1.1 Mechanical Characterization- Microhardness

3.1.2 Mechanical Characterization- Tensile Strength