George Mason University Routing Network of Cisco Packet Tracer Lab Report
IT 341
undefined
Skills Exam II
undefined
Instructions:
undefined
You have been provided with the required addressing table and network topology in a pkt file. Follow the instructions and
undefined
Deliverables:
undefined
Zipped folder containing:
undefined
|
Device |
Interface |
IP Address |
Subnet Mask |
Default Gateway |
|
R1 |
Gi0/0 |
11.11.11.1 |
255.255.255.0 |
NA |
|
S0/0/0 |
14.14.14.1 |
255.255.255.252 |
NA |
|
|
S0/0/1 |
12.12.12.1 |
255.255.255.252 |
NA |
|
|
R2 |
S0/0/0 |
23.23.23.1 |
255.255.255.252 |
NA |
|
S0/0/1 |
12.12.12.2 |
255.255.255.252 |
NA |
|
|
R3 |
Gi0/0 |
33.33.33.1 |
255.255.255.0 |
NA |
|
S0/0/0 |
23.23.23.2 |
255.255.255.252 |
NA |
|
|
S0/0/1 |
34.34.34.1 |
255.255.255.252 |
NA |
|
|
R4 |
Gi0/0 |
44.44.44.1 |
255.255.255.0 |
NA |
|
S0/0/0 |
14.14.14.2 |
255.255.255.252 |
NA |
|
|
S0/0/1 |
34.34.34.2 |
255.255.255.252 |
NA |
|
|
PC1 |
NA |
11.11.11.2 |
255.255.255.0 |
11.11.11.1 |
|
PC3 |
NA |
33.33.33.2 |
255.255.255.0 |
33.33.33.1 |
|
PC4 |
NA |
44.44.44.2 |
255.255.255.0 |
44.44.44.1 |
undefined
Task 1: Configure Basic Device Settings (10 Points)
undefined
Step 1: Setup host name for the routers as given in the topology.
undefined
Step 2: Setup enable password: class
undefined
Step 3: Setup line console password: cisco
undefined
Task 2: Configure and verify OSPF Routing (40 Points)
undefined
Step 1: Configure OSPF as the routing protocol on all four routers and advertise the appropriate networks using the network statement. (hint: determine the connected networks for each router and advertise them through OSPF.) You need to use PROCESS ID: 100 and Area: 0 in your OSPF configurations. (15 points)
undefined
Step 2: Prevent routing updates on the interfaces of R1 on which routing advertisements are not required. (hint: you should use passive-interface command for the LAN interface.) (10 points)
undefined
Step 3: Verify that OSPF is running on the routers. Which command would you use to confirm that OSPF is running? (10 points)
undefined
Step 4: Examine the routing tables on all routers. What command should you use to examine the routing table content? (5 points)
undefined
Task 3: Configure Static Routing (30 Points)
undefined
Step 1: From R4 OSPF configuration, remove the LAN network 44.44.44.0/24.(5 points)
undefined
Step 2: Configure static routes on R1 and R2 to reach to network 44.44.44.0/24 with S0/0/0 as the next hop. (10 points)
undefined
Step 3: Configure static route on R3 to reach to network 44.44.44.0/24 with S0/0/1 as the next hop. (5 points)
undefined
Step 4: Verify the routing configuration by viewing the routing tables of R1, R2 and R3. How can you confirm from the routing tables that all static routes have been added correctly? (10 points)
undefined
Task 4: Saving your Configurations and Restart the Devices (5 Points)
undefined
- Save your configuration by using the proper save command on the routers. Now, click on ‘Power Cycle Devices’ to restart the network. Please make sure to save your configuration before restarting your devices.
undefined
Task 5: Verify Connectivity (15 points)
undefined
- To verify connectivity, you should be able to ping between all the devices.
undefined
|
From |
To |
Fail/Pass |
|
PC1 |
PC3 |
|
|
PC1 |
PC4 |
|
|
PC3 |
PC4 |
